So often people are reluctant to build earth or masonry ovens because they're afraid that once constructed, the oven will have to reside on its given location for eternity or even longer. Their fear is well-founded.
This oven, built and designed by Chuck Lakin, has an oven base made from wood and held together by screws. The oven proper is firebrick with a roof supported by angle iron. No cement or mortar has been used. The idea was to build a masonry oven that could easily be dismantled, moved to another place in the yard, or be fired up in a distant location.
This oven, built and designed by Chuck Lakin, has an oven base made from wood and held together by screws. The oven proper is firebrick with a roof supported by angle iron. No cement or mortar has been used. The idea was to build a masonry oven that could easily be dismantled, moved to another place in the yard, or be fired up in a distant location.
Chuck assembles the wooden base
The base sits on a crushed stone bed that facilitates good drainage in a wet area
Chuck assembles the angle iron that will support the interior oven roof
Perlite insulation is spread across the top of the oven
The completed oven with a metal roof and shelves to hold baking supplies and oven tools.Note the shelf under the oven for firewood storage.
Much more about this oven in future posts
Much more about this oven in future posts
8 comments:
How much does the entire unit weigh, and do you lift the entire thing like a little Gondala?
I don't know how much the unit weighs, but the oven can be completely disassembled and all the components will easily fit in the back of a pickup truck. It's possible that 4 burly guys could lift the oven intact and move it, but I'm not sure. I will find out though.
Thank you for posting on this project. I've been wanting to build an oven outside for some time now and couldn't find anything small enough for our yard. This is perfect for us.
If you look through my blog archives, you'll find many other small ovens.
On the "movable oven" shown, the baking surface measures 18" wide by 25" deep.
Hello, I like the blog.
It is beautiful.
Sorry not write more, but my English is bad writing.
A hug from Portugal
You can write to me in French or English, and your English is really okay. Sorry I don't speak Portuguese.
And a hug to you from Maine, USA.
Concerning the comment about oven weight and moving the oven, here's what the oven designer had to say, "Four burly guys might be able to lift the oven (it must weigh six or seven hundred pounds) but since no cement was used in the construction, I wouldn't chance having something shift while it was being moved. Except for the insulation, disassembly is easy. Take out six screws, back off two more and the whole top is free. Remove the top of the oven and the top layer on the sides and it would be much easier to carry, and disassembly and reassembly would take maybe ten minutes."
This is *beautiful*! I think it might be one of my favorites. Well done, Breadhunter and friend!
Post a Comment